Need help?Do you have a question about the Polaris 360 and is the answer not in the manual?
General| Pool Type | In-ground |
|---|---|
| Debris Bag | Yes |
| Booster Pump Required | Yes |
| Cleaning Cycle | 3 hours |
| Cleaning Coverage | Full Pool Coverage |
| Cleaning Area | Pool Floor and Walls |
| Filter Type | Filter Bag |
| Power Source | Water pressure |
| Warranty | 1 year limited |
Check water pressure using the pressure tester and UWF®.
Measure and cut the hose to the correct length for pool coverage.
Connect the hose, submerge the cleaner, and turn on the pump.
Verify wheel revolutions per minute for optimal cleaner performance.
Troubleshoot and adjust wheel speed based on RPM readings.
Resolve issues with cleaner hanging on obstacles or not backing up.
To Next Page
