Polaris 360 User Manual

English
7
5
Assemble the Cleaner
1. Remove the pressure tester (o) by unscrewing the hose nut (q).
NOTE: The hose nut has reversed threads.
2. Use the same hose nut (q) and secure the hose to the cleaner body at the
feed pipe.
3. Pull the bag up and attach to the hose using the bag clip (n) .
4. Push the head float (c) all the way forward, up against the
cleaner body.
c
q
n

Polaris 360 Specifications

General

Pool Type	In-ground
Debris Bag	Yes
Booster Pump Required	Yes
Cleaning Cycle	3 hours
Cleaning Coverage	Full Pool Coverage
Cleaning Area	Pool Floor and Walls
Filter Type	Filter Bag
Power Source	Water pressure
Warranty	1 year limited