Need help?Do you have a question about the Polaris Vac-Sweep 280 and is the answer not in the manual?
General| Cleaning Coverage | Up to 30 feet |
|---|---|
| Filter Bag | Yes |
| Pool Type | In-ground |
| Feed Pipe Size | 1.5 inches |
| Warranty | 1 year limited |
| Type | Pressure Side |
| Power Source | Pressure from pool pump |
Provides contact details and support channels for customer service and assistance.
Details the one-year limited warranty, coverage, exclusions, and claims procedure.
Warns about potential vinyl liner pattern removal due to contact with the cleaner.
Lists and illustrates all components included in the Polaris 280 cleaner package.
Step-by-step guide for installing the Universal Wall Fitting into the pool's return line.
Instructions on measuring and cutting the feed hose to match the pool depth for optimal performance.
Details the steps for assembling the Polaris cleaner components, including hose and bag attachment.
Explains how to check and adjust the cleaner's wheel revolutions per minute (RPM) for optimal operation.
Describes how to adjust the thrust jet for directional control and optimal cleaning patterns.
Guides on adjusting the sweep hose motion for a gentle sweeping effect.
Covers essential maintenance tasks like cleaning the bag and filters for sustained performance.
Provides instructions for proper storage and winterizing to protect the cleaner from damage.
Solutions for the cleaner getting stuck on obstacles, including checking RPM and adjusting jets.
Troubleshooting steps for reduced power, such as cleaning filters and checking for leaks.
Fixes for the cleaner not cleaning the pool floor, involving restrictor disks and RPM.
Solutions for the back-up valve not functioning, including checking cycling and bag fullness.
Steps to correct the cleaner consistently turning in only one direction.
Advice on preventing feed hose tangling, such as checking hose length and swivels.
Solutions for the sweep hose getting caught in the vacuum tube, like checking the scrubber.
Fixes for excessive water spray from the sweep hose, including adjustment and weights.
Steps to ensure the cleaner covers the entire pool, checking hose length and jets.
Troubleshooting for the cleaner running on its side, checking bag, float, and hose floats.
A checklist to help diagnose common issues with the Polaris cleaner before contacting support.
To Next Page
