Congratulations on the purchase of your new automatic pool cleaner, and thank you for
choosing Polaris. The Polaris Vac-Sweep 280 is designed to give you years of dependable
and efficient service.
Like most mechanical devices, it will require periodic adjustments, routine maintenance, and
the replacement of certain hardworking parts. Please have your cleaner checked
occasionally by your local Polaris dealer or authorized service center.
Always insist on genuine Polaris replacement parts. Non-Polaris parts are not made to our
specifications. They may have an adverse effect on the operation of your Polaris or may even
damage it.
For best results, the Polaris 280 should be installed by a pool professional. For those with
experience and confidence in handling plumbing and mechanical equipment, installation is
outlined in this manual.
Polaris 280 Complete Cleaner
www.polarispool.com
Introduction
English
1. All-Purpose Zippered Bag
2. Head Float
3. Sweep Hose
4. Sweep Hose Scrubber
5. Cleaner Body
6. Feed Hose
07. Hose Floats
08. Back-up Valve
09. In-Line Filter Assembly
10. Quick Disconnect with
Universal Wall Fitting (UWF)
11. Restrictor Disks (one red and one blue)
To Next Page
Loading...
Need help?
General
