Need help?Do you have a question about the Polaris 280 and is the answer not in the manual?
General| Pool Type | In-ground |
|---|---|
| Booster Pump Required | Yes |
| Cleaning Cycle | 3 hours |
| Filter Type | Bag |
| Warranty | 1 year limited |
| Hose Length | 31 feet |
| Power Source | Pressure from booster pump |
| Type | Pressure Pool Cleaner |
| Debris Bag | Single chamber filter bag |
List of components included in the Polaris 280 package.
Details on dedicated return lines and over-the-deck installations.
Step-by-step guide for installing the universal wall fitting.
Instructions for correctly sizing and cutting the cleaner's feed hose.
Guidance on assembling the Polaris cleaner unit.
How to verify the Polaris 280 is operating correctly.
Adjusting the thrust jet to control the cleaner's directional movement.
Positioning the head float to ensure stable and upright operation.
Adjusting the sweep hose for optimal cleaning motion.
Using restrictors to optimize water pressure for the Polaris.
Method to check wheel RPM for proper water pressure.
Understanding the Polaris 280's cleaning capabilities and time.
Proper procedure for powering the cleaner and booster pump.
Determining the optimal running duration for pool cleaning.
Steps for attaching and detaching the Polaris from the pool wall.
Instructions for removing and cleaning the cleaner's filter bag.
How to clean the filter screen inside the quick disconnect.
Checking and rotating wear rings to maximize their lifespan.
Criteria for when to replace the Polaris tires.
Checking and replacing the sweep hose scrubber.
Accessories to manage sweep hose behavior and prevent snags.
Optional fountain attachments for the universal wall fitting.
Different filter bag types and a hand-held cleaning tool.
Matrix of typical issues and their recommended fixes.
A checklist to help diagnose issues before contacting support.
To Next Page
