Polaris 7240 Sport User Manual (English)

Other manuals for Polaris 7240 Sport

Questions and Answers:

A
Ann ElliottJul 27, 2025
Why is my Polaris Swimming Pool Vacuum not cleaning effectively?
- S
  Sarah BellJul 27, 2025
  If your Polaris Swimming Pool Vacuum isn't cleaning effectively, several factors could be at play. The brushes may be smooth or the wear indicator might be showing, indicating they need replacement. The filter canister could be full or dirty, requiring cleaning. The floating cable might be excessively coiled or kinked; ensure it's spread out over the pool and not tightly wrapped during storage, or lay it straight in the sun to relax it. Also, check if the tire track is coming off the wheels and ensure it's properly inserted in the wheel groove; if it persists, replace the tire track.
G
Grace AndersonJul 31, 2025
Why won't my Polaris 7240 Sport Swimming Pool Vacuum climb the walls?
- M
  Megan HowardJul 31, 2025
  If your Polaris Swimming Pool Vacuum is no longer climbing the pool walls, the filter canister may be full or dirty and needs cleaning. Also, the pool walls may be slippery due to microscopic algae. Perform a shock chlorination treatment to reduce the pH levels in the pool, but do not leave the cleaner in the pool during this treatment. Check tracks for wear and replace them if needed.
R
Robert WallerAug 4, 2025
Why does my Polaris Swimming Pool Vacuum not move on startup?
- R
  robersonjosephAug 5, 2025
  If your Polaris Swimming Pool Vacuum doesn't move on startup, first check that the outlet to which the control unit is connected is receiving electricity. If there is power, the unit may be turned OFF. Turn the tracks, then disconnect the control unit and wait at least 20 seconds before reconnecting. If the problem persists, contact your local retailer or Polaris Technical Support.
B
Brandy RoyAug 9, 2025
What to do if my Polaris Swimming Pool Vacuum doesn't stay on the bottom?
- B
  Betty ThompsonAug 9, 2025
  If your Polaris Swimming Pool Vacuum isn't staying firmly on the pool bottom, there might be air trapped inside; remove the cleaner from the pool and re-submerge it. Also, the filter canister could be full or dirty, requiring cleaning.
A
Alicia JonesAug 13, 2025
What does it mean if the Information LED flashes on my Polaris 7240 Sport Swimming Pool Vacuum after starting?
- L
  laura25Aug 13, 2025
  If the Information LED on your Polaris Swimming Pool Vacuum flashes just after starting, the floating cable may not be correctly plugged into the control unit; unplug it and reconnect it. The cleaner may also not be fully submerged; remove it from the pool and re-submerge it. If this does not resolve the issue, contact your local retailer or Polaris Technical Support, as the propeller or wheels may be jammed.
T
Tiffany PenaAug 17, 2025
What to do if the Information LED flashes during the cleaning cycle of my Polaris Swimming Pool Vacuum?
- T
  Thomas SchultzAug 17, 2025
  If the Information LED on your Polaris Swimming Pool Vacuum flashes during the cleaning cycle, the cleaner may be sucking air. Remove the cleaner from the pool and re-submerge it.
P
poncealiceAug 21, 2025
How to stop the cable from tangling on my Polaris 7240 Sport?
- I
  Ian SwansonAug 21, 2025
  If the cable of your Polaris Swimming Pool Vacuum is tangling in the pool, ensure the floating cable enters the water near the middle of the pool length. Spread all of the floating cable carefully in the pool, making sure there are no kinks or coils.

Polaris 7240 Sport Specifications

General

Pool Type	In-ground
Cable Length	60 feet
Type	Robotic
Cleaning Coverage	Floor, walls, and waterline
Filter Type	Canister
Power Source	Electric
Hose Length	Not applicable
Warranty	2 years