Page 17
English
Replacing Wear Parts
Replacing Brushes
The cleaner is tted with a TPE brush in front. There are ''wear'' indicators (Figure
19) on the brush. To maintain cleaner performance at its best, replace the brush as
soon as the wear indicator has been reached. Zodiac recommends that you replace
the brushes every two (2) years.
raised groove becomes
partially flattened,
indicating excessive
wear
Figure 19. Worn Brush Indicator
To maintain cleaner performance at its best you need to replace the brush as soon
as one of the wear indicators is reached (even if the blade wear is not even). It is
recommended that you replace the brush when the rubber is worn down to the top
of the wear indicator (or every two years, whichever comes rst).
To replace a worn brush:
1. Separate the edges of the brush, undo the tabs, and remove the worn brush.
2. Position the new brush underneath the roller with the spikes facing
downwards (Figure 20).
Figure 20. Position the New Brush on Roller
To Next Page
Loading...
