67
THE PERFECT FIT
Suspension Quick Setup Guide
Shock Compression Damping (SKS, ASSAULT RMK,
optional for PRO-RMK)
The primary adjustment for overall vehicle balance is RTS spring
preload. Perform this adjustment first. After adjusting RTS spring
preload to your satisfaction, compression damping adjustments can be
made to control ride quality and bottoming resistance.
Compression damping can be adjusted at the front suspension and at the
rear track shock. Make adjustments in 2-click increments, then test ride.
When adjusting the front suspension, always adjust both clickers
equally.
To stop bottoming of the front or rear suspension (stiffer ride), rotate the
clicker(s) clockwise two clicks (as viewed from the top of the clicker),
then test ride. Repeat the adjustment until bottoming stops and the
desired ride quality is achieved.
For a more plush ride at the front or rear suspension, rotate the
clicker(s) counter-clockwise two clicks, then test ride. Repeat the
adjustment until the desired ride quality is achieved.
To Next Page
Loading...
Need help?
General
