90
MAINTENANCE AND LUBRICATIO N
Adjustments
Handlebars
The handlebars can be adjusted for
rider preference.
1. Locate handlebar bolts (1) by
removing the upper headlight pod.
2. Loosen the four bolts.
3. Adjust the handlebar to the desired
height. Be sure the handlebars do not
contact the gas tank or any other part of
the machine when turned fully to the left or right.
4. Lightly tighten each bolt equally to prevent uneven gaps in the
block.
5. Torque the handlebar adjuster block bolts to 10-12 ft. lbs. (14-17
Nm).
Improper adjustment of the handlebars or incorrect torquing of
the adjuster block tightening bolts can cause limited steering or
loosening of the handlebars, resulting in loss of control and
possible serious personal injury or death. Follow the adjustment
procedures exactly, or see your Polaris dealer for service.
WARNING
1
To Next Page
Loading...
Need help?
General
