Polaris 700 - Page 10

10
Step 3
With the gate in the desired open position and with
the gate operator in its fully retracted position, install
the gate operator. Ensure the gate operator is mounted
level.
Figure 7
3/8” Flat washer
3/8” – 16 Hex nut
3/8” x 1 1/8” OD x
1/2” Bushing
Clevis pin clip
3/8” x 2 3/8”
Clevis pin
3/8” – 16 x 3”
Hex bolt
3/8” x 1 1/8” OD x
3/32” Bushing
Clevis pin clip
3/8” x 1 3/8”
Clevis pin
PULL-TO-OPEN GATE OPERATOR MOUNTING