9
Step 1
The post bracket and pivot bracket are installed as shown
in g. 5. **Note - If using supplied brackets for an Amazing
Gate System with posts, please refer to installation
instructions provided with your Amazing Gate.***
Step 2
The gate bracket is installed as shown in g. 6.
Figure 6
Figure 5
1/2” – 13 Hex
3/8” – 16 x 3” Hex
bolt
Post bracket
3/8” – 16 x 10” Carriage or
all thread bolt
Pivot bracket
3/8” Flat washer
3/8” – 16 Hex nut
Post
1/2” Flat washer
3/8” – 16
Hex nut
3/8” Flat washer
3/8” – 16 x 3”
Hex bolt
Gate
Gate bracket
PULL-TO-OPEN GATE OPERATOR MOUNTING
To Next Page
Loading...
