Polaris 800 RMK User Manual

35
FEATURES
Instrument Cluster
Indicators
Check Engine Indicator
This indicator appears if an EFI-related fault occurs. Do not operate the
snowmobile if this warning appears. Serious engine damage could
result. See your dealer. See page 48 for diagnostic code definitions.
Over-Temperature Indicator
This indicator illuminates to alert the operator that the engine is
overheating. The operator should take action to cool the engine. See
page 92. If the indicator flashes, continued operation could result in
serious engine damage. Stop the engine immediately.
Low Oil Indicator
The low oil indicator light may flicker at times due to oil movement in
the bottle, but when the light comes on and remains on, add the
recommended oil before further operation. See page 71.
High Beam Indicator
The high beam indicator illuminates when the lights are set to high
beam.
Parking Brake Indicator
This indicator illuminates when the parking brake is engaged. It will
also illuminate when the service brake is in use. See page 60.
Reverse Indicator
This indicator flashes when the transmission is in reverse. See page 75.

Polaris 800 RMK Specifications

General

Bore x Stroke	85 mm x 70 mm
Engine Stroke	2-Stroke
Rear Suspension	RMK Adjustable
Track Width	15 inches
Track Length	155 in (393.7 cm) / 163 in (414 cm)
Track Height	2.4 inches
Fuel Capacity	11.5 gallons
Engine	Liberty 800
Rear Travel	16 in (40.6 cm)
Displacement	794cc