42
FEATURES AND CONTRO LS
Automatic Transmission Gear Selector
The transmission gear select or (1)
is located on the right side of the
vehicle.
H: High Gear
L: Low Gear
N: Neutral
R: Reverse
P: Park
To shift into HIGH or PARK, you
must first apply t he auxiliary brake
to activat e t he high/park lock-out mechanism. When shifting out of
HIGH or PARK, it’s not necessary to apply the brake.
CAUTION
Shifting gears with the engine speed above idle or while the
vehicle is moving could cause transmission damage. To change
gears, stop the vehicle, and with the engine idling, move the lever
to the desired gear. Apply the auxiliary brake before attempting
to shift into high gear or park.
Whenever the ATV is left unattended, always place the transmission in
park and l ock the parking brake.
Maintaining shift linkage adjustment is important to assure proper
transmission function. See your dealer if you experience any shifting
problems.
Belt Life
To exte nd belt life , use low for wa rd gea r in heavy pulling situations and
whe n operating at less than seven miles per hour for exte nded per iods of
time.
If towing the vehicle is necessary, shift the transmission into neutral for
better m obility and to prevent damage to the belt.
1
H
N
P
L
R
To Next Page
Loading...
Need help?
General
