120
MAINTENANCE
Exhaust System
Check the exhaust system for wear or damage at the intervals outlined in
the Periodic Maintenance Table beginning on page 98.
1. Allow the engine and exhaust system to cool completely.
2. Open the hood.
3. Inspect the muffler and pipes for cracks or damage. Check for weak
or missing retaining springs or damper/support grommets.
4. Replace any damaged or missing components.
5. Clean the plastic surfaces next to the muffler with aerosol Carbure-
tor and Throttle Body Cleaner.
NOTE: See page 149 for the part numbers of Polaris products.
6. Close the hood.
WARNING
Hot exhaust system parts can cause serious burns. Allow adequate time for
the exhaust system to cool. Never perform this procedure with the engine
running.
To Next Page
Loading...
