Polaris Maxx - Bluetooth Device Management; Pairing and Disconnecting Devices

6
Bluetooth can be temperamental at mes. If the Polaris Maxx does not nd your
device, turn your Bluetooth o and back on through your Bluetooth enabled device and
scan again.
Select your device
Once your device is
selected touch the
pair icon
Follow any prompts on your phone and once the device has paired successfully, it will
move over to the paired devices column.
You can also connect your Bluetooth device by following the normal procedure through
your device. This usually involves going into your devices > bluetooth sengs and
scanning for other Bluetooth devices.
The Polaris Maxx’s Bluetooth ID is Polaris Maxx > Select Polaris Maxx on your
device > when your device asks you for a passcode, please enter 0000.
For a more in depth look at the Bluetooth sengs, please see page 12-19