Polaris P724 User Manual

72 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

ENGLISH

|

FRANÇAIS

|

ESPAÑOL

H0582000_REVB

Owner's Manual

TYPE EP37--

Table of Contents

Other manuals for Polaris P724

Quick Start Guide2 pages

Questions and Answers:

W
wernerrichardAug 14, 2025
Why is my Polaris P724 Swimming Pool Vacuum not cleaning effectively?
- M
  maria53Aug 14, 2025
  If your Polaris Swimming Pool Vacuum isn't cleaning effectively, several factors could be at play. The brushes may be smooth or the wear indicator might be showing, indicating they need replacement. The filter canister could be full or dirty, requiring cleaning. The floating cable might be excessively coiled or kinked; ensure it's spread out over the pool and not tightly wrapped during storage, or lay it straight in the sun to relax it. Also, check if the tire track is coming off the wheels and ensure it's properly inserted in the wheel groove; if it persists, replace the tire track.
E
ebarberAug 17, 2025
Why won't my Polaris P724 climb the walls?
- L
  Lisa FischerAug 18, 2025
  If your Polaris Swimming Pool Vacuum is no longer climbing the pool walls, the filter canister may be full or dirty and needs cleaning. Also, the pool walls may be slippery due to microscopic algae. Perform a shock chlorination treatment to reduce the pH levels in the pool, but do not leave the cleaner in the pool during this treatment. Check tracks for wear and replace them if needed.
M
Michelle OneillAug 21, 2025
Why does my Polaris P724 not move on startup?
- J
  Jenny MooneyAug 21, 2025
  If your Polaris Swimming Pool Vacuum doesn't move on startup, first check that the outlet to which the control unit is connected is receiving electricity. If there is power, the unit may be turned OFF. Turn the tracks, then disconnect the control unit and wait at least 20 seconds before reconnecting. If the problem persists, contact your local retailer or Polaris Technical Support.
R
rhonda86Aug 25, 2025
What to do if my Polaris Swimming Pool Vacuum LED flashes three times?
- A
  Ashley PhamAug 25, 2025
  If the LED on your Polaris Swimming Pool Vacuum flashes three times with a one-second interval, try the following: Clean the filter canister, check the pump axis for debris, and inspect the propeller for any obstructions. After completing these steps, start a new cleaning cycle. If the issue continues, further assistance may be needed.
M
Margaret BenjaminAug 27, 2025
How to fix a Polaris Swimming Pool Vacuum when the LED flashes once?
- M
  michaelmoralesAug 27, 2025
  If the LED on your Polaris Swimming Pool Vacuum flashes once with a one-second interval, unplug the floating cable from the control unit and then reconnect it. If the problem continues, further assistance may be needed.
R
rvalenciaAug 30, 2025
What to do if my Polaris Swimming Pool Vacuum doesn't stay on the bottom?
- T
  Thomas WilsonAug 31, 2025
  If your Polaris Swimming Pool Vacuum isn't staying firmly on the pool bottom, there might be air trapped inside; remove the cleaner from the pool and re-submerge it. Also, the filter canister could be full or dirty, requiring cleaning.
G
Gabriel WoodsSep 3, 2025
What does it mean if the Information LED flashes on my Polaris P724 after starting?
- E
  Elizabeth PooleSep 3, 2025
  If the Information LED on your Polaris Swimming Pool Vacuum flashes just after starting, the floating cable may not be correctly plugged into the control unit; unplug it and reconnect it. The cleaner may also not be fully submerged; remove it from the pool and re-submerge it. If this does not resolve the issue, contact your local retailer or Polaris Technical Support, as the propeller or wheels may be jammed.
M
matthew57Sep 6, 2025
What to do if the Information LED flashes during the cleaning cycle of my Polaris P724?
- S
  Stephanie JonesSep 6, 2025
  If the Information LED on your Polaris Swimming Pool Vacuum flashes during the cleaning cycle, the cleaner may be sucking air. Remove the cleaner from the pool and re-submerge it.
C
Courtney WagnerSep 10, 2025
How to stop the cable from tangling on my Polaris Swimming Pool Vacuum?
- E
  Emily NolanSep 10, 2025
  If the cable of your Polaris Swimming Pool Vacuum is tangling in the pool, ensure the floating cable enters the water near the middle of the pool length. Spread all of the floating cable carefully in the pool, making sure there are no kinks or coils.

Polaris P724 Specifications

General

Brand	Polaris
Model	P724
Category	Swimming Pool Vacuum
Language	English

Summary

FCC Statement and Compliance

FCC Rules Compliance

Device complies with FCC Part 15 and IC standards, with conditions for operation.

RF Radiation Exposure Limits

Device adheres to RF exposure limits and requires specific installation distance.

Important Safety Instructions

Prevent Electrical Shock

Critical safety measures to avoid electrical hazards and electrocution.

Prevent Child Injury and Drowning

Guidelines to prevent accidents and ensure child safety around the pool cleaner.

Cleaner Specifications

General Specifications

Key technical details and physical characteristics of the robotic pool cleaner.

Assembly Instructions

Package Contents

List of all items included in the cleaner's packaging for initial setup.

Connect to Power Source

Step-by-step instructions for safely connecting the cleaner's control unit to power.

General Cleaner Operation

Install and Submerge Cleaner

Procedures for properly installing and submerging the cleaner into the pool water.

Start and Stop Cleaning

How to initiate and terminate the pool cleaning cycle using the control unit.

Remove from Pool

Safe methods for lifting and removing the cleaner from the pool water.

Clean Filter Canister

Instructions for emptying and cleaning the cleaner's filter canister after use.

Maintenance Procedures

Cord Tangling Prevention

Tips and procedures to avoid or resolve tangling issues with the floating cable.

Replacing Wear Parts

Guidance on identifying and replacing worn components to maintain optimal performance.

Spare Parts Availability

Information on where to find and order replacement parts for the cleaner.

Troubleshooting Guide

Using the Information LED

Interpreting LED flash sequences to diagnose common cleaner malfunctions.

General Troubleshooting

Common problems, their causes, and solutions for operating the robotic cleaner.

Related product manuals

Preview: Polaris p825

Preview: Polaris PosiTrax

Polaris PosiTrax

Preview: Polaris 280

Preview: Polaris 380

Preview: Polaris 9550 Sport

Polaris 9550 Sport

Preview: Polaris Vac-Sweep 65

Polaris Vac-Sweep 65

Preview: Polaris Vac-Sweep 360

Polaris Vac-Sweep 360

Preview: Polaris Vac-Sweep 280

Polaris Vac-Sweep 280