Polaris PosiTrax User Manual

POLARIS 280
Code Description
1 Year Warranty
W7220000 Polaris Vac-Sweep® 280
W7220000P Polaris Vac-Sweep® 280, PosiTrax®
W7220005 Polaris Vac-Sweep® 280, TankTrax®
IMPORTANT INFORMATION
Always disconnect the Polaris from the pool wall when cleaning or backwashing the pool •
filter.
After cleaning or backwashing, let the filtration system run for at least five minutes before •
re-connecting the Polaris.
New plumbing lines should be flushed out before installing the Polaris.•
The Polaris should not be used to remove plaster dust in new pools.•
Always remove the Polaris • before swimmers enter the pool.
Except when checking the wheel RPM, do not handle the Polaris while it is operating.•
Always remove the Polaris from the pool before chemical shock treatments.•
Polaris Vac-Sweep® 280 Limited Warranty
This one year limited warranty is extended to the original consumer purchaser of this Polaris
Vac-Sweep 280 Automatic Pool Cleaner manufactured by Polaris Pool Systems, Inc., from date
of manufacture of the unit as established by the serial number, or one year from date of purchase
with proof of purchase, whichever is later. Polaris warrants this product, including all parts and
components thereof, to be free of defects in material and workmanship. Normal replacement items
such as bags, tires, sweep hoses or sweep hose scrubbers which have been worn out by use or
improper installation are not covered by
this warranty. The Polaris 280 frame is warranted for a
period of five years.
This limited warranty does not apply if the failure is caused or contributed to by any of
the following: improper handling, improper usage, improper storage, winter freezing, abuse,
improper installation, removal of the in-line filter screen, unsuitable application of the unit,
improper maintenance, lack of reasonable and necessary maintenance, damage in transit or
during installation, or damage from repairs/alterations made or attempted by anyone other than
Polaris or one of its Authorized Service Centers. In no event shall Polaris be liable for incidental or
consequential damages of any nature or for damages to persons or property, including damage to
vinyl liners, plaster, tile, aggregate-based and other pool surfaces, or damages resulting from the
use of this product with a substandard pool circulation system or chemical imbalance.
Authorization to return a unit or part to the plant of manufacture must be obtained from the
Polaris Customer Service Department. Check with your dealer for the local procedure before
exercising this warranty. If further directions or instructions should be required, contact the
Customer Service Department at 1-800-VAC-SWEEP (USA and Canada only) or (760) 599-9600.
Be sure to insure the shipment against
loss or damage in transit.
This limited warranty is valid only in the United States of America, Canada and Australia, and
it does not apply to Polaris Vac-Sweep 280 Automatic Swimming Pool Cleaners sold or installed in
any other country. Polaris Vac-Sweep 280 Automatic Pool Cleaners sold in the United Kingdom are
warranted for a period of two years from date of invoicing to the first user.

Polaris PosiTrax Specifications

General

Brand	Polaris
Model	PosiTrax
Category	Swimming Pool Vacuum
Language	English

Summary

Polaris Vac-Sweep 280 Limited Warranty

Polaris 280 Complete Cleaner Components

Quick Installation Instructions

Install the Universal Wall Fitting

Install the Universal Wall Fitting on dedicated cleaner return lines with a threaded 1-1/2” female pipe fitting.

Adjust Feed Hose to Fit Pool Length

Measure deepest pool part and cut leader hose to match its greatest depth for proper feed hose adjustment.

Cleaner Assembly and RPM Check

Assemble the Cleaner

Attach feed hose to feed pipe, connect bag collar, and position head float for cleaner assembly.

Check for Proper Wheel RPM

Ensure proper wheel RPM (28-32) for maximum cleaner efficiency. Check wheel revolutions for 1 minute.

Fine Tuning the Polaris Cleaner

Thrust Jet Adjustment

The thrust jet directs the cleaner's movement; factory setting is straight back, but adjustable for pool conditions.

Sweep Hose Adjustment

Adjust sweep hose motion by turning the adjustment screw to increase or decrease its sweeping action.

Routine Maintenance

Clean the Filter Bag

Remove and empty the filter bag by releasing the collar and opening the closure to dump debris.

In-Line Filter Maintenance

Clean the in-line filter screen by pulling it out, rinsing it thoroughly, and pressing it back into place.

Storage and Winterizing

Never store the Polaris in direct sunlight. Drain water for winter storage to prevent freeze damage.

Troubleshooting Common Issues

Hangs Up on Obstacles

Check wheel RPM, back-up valve cycling, thrust jet, and remove pool hardware or install a ladder guard.

Sluggish or Low Power

Check filter screen, baskets, hoses for leaks, and wheel RPM. Clean debris to restore water pressure.

Flies Around Pool or Lacks Bottom Contact

Check RPM, restrictor disk, and back-up valve cycling. Adjust pressure relief valve or restrictor disk.

Does Not Back Up

Verify back-up valve cycling, check wheel RPM, empty full bag, replace waterlogged head float, ensure feed hose floats.

Turns Only in One Direction

Adjust the thrust jet and ensure the feed hose is floating freely to correct directional turning issues.

Advanced Troubleshooting

Feed Hose Becomes Tangled

Verify hose length, check swivels and connections for free movement, and ensure the feed hose floats.

Sweep Hose Sucked into Vacuum Tube

Ensure sweep hose opening is not blocked and adjust sweep hose motion to a gentle sweeping motion.

Sweep Hose Sprays Too Much Water

Adjust sweep hose speed, replace worn scrubber, or add a sweep hose weight to prevent spraying.

Cleaner Does Not Clean Entire Pool

Check hose length, thrust jet position, and vacuum jets for obstructions. Contact service if jets are uneven.

Cleaner Runs in Circles on Its Side

Check for a full filter bag, waterlogged head float, or unevenly spaced hose floats.

Troubleshooting Worksheet Information

Worksheet Data Collection

Gather serial number, wheel RPM, and check valve cycling, hose length, swivels, filter screen, jets, and drive train.