Prior to installing the unit, please make sure that you have all
the parts from the box and the necessary tools to complete the
installation.
1. RW-50/15 Fascia
2. RW-50/15 8” Interface
Screen
3. Harness 1 & Harness 2
4. Bluetooth External
Microphone
5. GPS External Antenna +
Bracket & Screws
6. Power Amplifier Box
7. Instruction Manual
8. Trim Tool
9. Rear Vision Camera
1. Trim tools
2. Cable tie
3. Soldering Iron & Solder
4. Electrical Tape
5. Heat shrink
6. Burner for Heat shrink
7. Small Terminal driver
8. Short Phillips head screwdriver
9. Multi tip set
10. Side cutters
11. Drill
12. Split conduit
13. Yellow Tongue (long strike, approx. 3-4 metres)
14. Short strike (approx. 1 metre)
1. RW-50/15 Fascia
4. Bluetooth External Microphone
5. GPS External Antenna +
Bracket & Screws
6. Power Amplifier Box
7. Instruction Manual
8. Trim Tool
9. Rear Vision Camera
3. Harness 1 & Harness 2
2. RW-50/15 8” Interface Screen
3
Parts - Packing List
Tools required