Polaris msx 150 Service Manual

MAINTENANCE
2.92004 Four Stroke PWC Service Manual
Valve Clearance Adjustment Procedure -- Continued
9. Install the Valve Compression Tool, PN--46991 ,
under the rocker arm and over the top of the valve.
Push the lever down, and extract the shim using a
magnet.
CAUTION:
Do not compress the valve into the piston face. Do not
damage or move the valve keepers.
10. Measure the original shim and determine the shim,
smaller or larger, that will satisfy the clearance
specification.
Available valve clearance shims.
Part Number
Shim Thickness
(mm)
0451357 2.50
0451358 2.55
0451359 2.60
0451360 2.65
0451361 2.70
0451362 2.75
0451363 2.80
0451364 2.85
0451365 2.90
0451366 2.95
0451367 3.00
0452023 3.05
0451368 3.10
0451369 3.15
0451370 3.20
0451371 3.25
0451372 3.30
0451373 3.35
0451374 3.40
0451375 3.45
0451376 3.50
0451377 3.55
0451378 3.60
0451379 3.65
0451380 3.70
11. After performing the valve adjustment procedure on the MAG cylinder valves, rapidly tap the start button to
rotate the engine to TDC -- COMPRESSION stroke on the PTO cylinder.
12. Perform the valve adjustment procedure on the PTO cylinder valve train.
13. When completed, reinstall the valve cover. Tighten fasteners to 7 ft.lbs. (10 Nm).
14. Reinstall the phase sensor, ignition coil, and fuel injector wiring harness connectors.

Polaris msx 150 Specifications

General

Brand	Polaris
Model	msx 150
Category	Boat
Language	English