ASSEMBLY NOTES
ECU Mounting Bracket Fastener Torque: 10 ft.lbs. (13Nm)
ECU--To--Rubber Insulators: 24 in.lbs. (3 Nm)
ECU w/insulators--To--Mounting Bracket: 6 ft.lbs. (8Nm)
Starter Solenoid / Relay Fastener Torque: 6 ft.lbs. (8 Nm)
DO NOT APPLY NYOGELt TO THE STARTER SOLENOID CONNECTOR OR INSIDE OF CONNECTOR HOUSING.
FUEL INJECTION / IGNITION / EXHAUST SYSTEMS
5.112004 Four Stroke PWC Service Manual
ECU Mounting
To Next Page
Loading...