Polaris msx 150 Service Manual

ENGINE DISASSEMBLY / ASSEMBLY
4.72004 Four Stroke PWC Service Manual
Service Tools
PW--46981 -- REQUIRED TOOL
CRANKSHAFT HAND CRANK (BARRING TOOL)
USED TO ROTATE CRANKSHAFT
PW--46982 -- REQUIRED TOOL
GEAR REMOVAL TOOL
USED TO REMOVE BALANCE SHAFT GEAR WHEN USED WITH
PW--46989 GEAR REMOVER BOLT.
PW--46983 -- REQUIRED TOOL
PISTON RING COMPRESSOR
USED TO INSTALL PISTONS INTO ENGINE BLOCK
PW--46984 -- REQUIRED TOOL
ENGINE STAND ADAPTER PLATE
ATTACHES TO REAR OF ENGINE BLOCK. ALLOWS TECHNI-
CIAN TO ROTATE ENGINE DURING DISASSEMBLY AND RE--
ASSEMBLY.
PW--46985 -- REQUIRED TOOL
TIMING CHAIN LINK REMOVAL / INSTALLATION TOOL
USED IN REMOVING AND RE--INSTALLING TIMING CHAIN.
PW--46989 -- REQUIRED TOOL
MAGNET ROTOR / GEAR REMOVER BOLT
USED TO REMOVE MAGNET ROTOR AND BALANCE SHAFT GEAR WHEN
USED WITH PW--46982.
PW--46991 -- REQUIRED TOOL
VALVE COMPRESSOR TOOL
USED TO COMPRESS VALVE SPRINGS WITH ENGINE EITHER
INSTALLED OR REMOVED FROM WATERCRAFT HULL.
PW--47077 -- REQUIRED TOOL
CAMSHAFT ALIGNMENT TOOL
INSTALLS INTO CAMSHAFT TO LOCK INTO BDC POSITION.
PW--47079 -- REQUIRED TOOL
TIMING CHAIN INSTALLATION TOOL
ROUTES TIMING CHAIN THROUGH ENGINE CRANKCASE DUR-
ING INSTALLATION.
PW--47108 -- REQUIRED TOOL
TIMING CHAIN WEDGE AND HOOK TOOL
USED DURING TIMING CHAIN INSTALLATION
PU--46219 -- OPTIONAL TOOL
MANUAL OIL PUMP / CONTAINER
USED TO REMOVE OIL FROM OIL TANK

Polaris msx 150 Specifications

General

Brand	Polaris
Model	msx 150
Category	Boat
Language	English