Polaris Outlaw 450 MXR LE User Manual

111
Maintenance
Engine Oil Change
1. Position the vehicle on a level surface.
2. Start the engine. Allow it to idle for two to three minutes. Stop the engine.
3. Place a drain pan beneath the crankcase. Remove the drain plug. Allow the oil to drain
completely.
4. Clean the crankcase sealing surface and the
drain plug (with magnet) thoroughly.
5. Replace the sealing ring. Reinstall the drain
plug. Torque to 15 ft. lbs. (20 Nm).
CAUTION
Hot oil can cause serious burns to skin. Do not allow hot oil to contact skin.
Drain
Plug

Polaris Outlaw 450 MXR LE Specifications

General

Brand	Polaris
Model	Outlaw 450 MXR LE
Category	Offroad Vehicle
Language	English