62
Features and Controls
Parking Brake
1. Place the transmission in first
gear.
2. Squeeze and release the brake
lever two or three times, then
squeeze and hold.
3. Push the parking brake lock
down to engage the lock.
Release the brake lever.
4. To release the parking brake
lock, squeeze and release the
brake lever. The lock will auto-
matically disengage.
WARNING
Operating the ATV while the parking brake is engaged could result in an accident and serious injury
or death. Always check to be sure the parking brake is disengaged before operating.
Locked
Unlocked
To Next Page
Loading...
