Polaris Outlaw 450 MXR LE User Manual

171
Maintenance
Rear Suspension
Compression Damping
Use a flat-blade screwdriver to make damping adjust-
ments.
The compression damping clicker is located on top of
the shock reservoir, under the right rear fender.
Turn the clicker clockwise (1) to increase compression
damping. Turn the clicker counter-clockwise (2) to
decrease compression damping.
NOTE: The factory setting is at 10 clicks from fully closed.
See Suspension Settings on page 166.
Clicker
1
2

Polaris Outlaw 450 MXR LE Specifications

General

Brand	Polaris
Model	Outlaw 450 MXR LE
Category	Offroad Vehicle
Language	English