129
Maintenance
Lights
Headlight Lamp Replacement
1. Remove the wire harness connector from
the back of the headlight.
2. On the left headlamp, grasp the bulb
housing and turn it counterclockwise to
remove the bulb. On the right headlamp,
turn the bulb housing clockwise to
remove the bulb.
3. Apply dielectric grease to the socket and
install the new bulb. Rotate firmly.
NOTE: The bulb must be positioned so the
harness installs into the lamp at outer
side.
4. Reinstall the connector to the back of the
headlight.
Left Lamp
Counterclockwise
Right Lamp
Clockwise
To Next Page
Loading...
Need help?
General
