EasyManua.ls Logo

Polaris Outlaw 9921811 - Carburetor Altitude Calibration

Polaris Outlaw 9921811
184 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
120
Maintenance
Carburetor
Your Polaris ATV is calibrated at the factory for optimal performance at altitudes ranging
from zero to 6,000 feet (1800 m) and temperatures of +40 degrees F. (4 degrees C.) or higher.
Above 6000 feet (1800 m) the engine air/fuel mixture becomes overly rich and the engine
loses approximately 3% of its power for each 1000-foot (304.8 m) increase in elevation.
Although this power cannot be regained, adjustments to the carburetor and drive system can
be made to allow more efficient operation. Optional jets, available from your Polaris dealer,
are required for operation above 6,000 feet and temperatures below +40 degrees F. (4
degrees C.).
NOTICE: Continuous operation of the engine without proper jetting when required can cause poor
performance, overheating or engine damage. See your Polaris dealer for more information
about jetting the ATV for conditions in your area.

Table of Contents

Related product manuals