133
Maintenance
Drive Chain
Lubricate the drive chain with Polaris chain spray lube or an approved chain lube at the gen-
eral lubrication interval specified in the Periodic Maintenance Chart beginning on page 94.
Lubricate more often under severe use, such as in dirty or wet conditions. See page 158 for
the part numbers of Polaris products.
NOTICE: Washing the drive chain with a high pressure washer or gasoline can cause premature wear
and drive chain failure. Don't use a high pressure washer or gasoline to clean the drive
chain.
Adjusting or operating the ATV with improper rear drive chain slack can result in severe
damage to the transmission and drive components. Always make sure the slack is within the
stated specifications.
To Next Page
Loading...
