77
Operation
Starting the Engine
6. Push the engine stop switch up to the ON position.
7. Turn the ignition key to ON.
8. Squeeze the rear brake lever and press the start button. The rear brake lever must be
engaged for the engine to start.
9. Do not press the throttle while starting the engine. Activate the starter for a maximum of
five seconds, releasing the button when the engine starts. If it doesn't start, release the
starter, wait five seconds, then activate for another five seconds. Repeat until the engine
starts.
10. If the engine slows or stops, position the choke lever half way to allow proper engine
warm up. Vary the RPM slightly with the throttle to aid in warm up.
11. When the engine idles smoothly, push the choke lever completely to the right.
To Next Page
Loading...
Need help?
General
