124
MAINTENANCE AND LUBRICATION
Spark Plugs
Spark Plug Removal and Replacement
3. Move the fuel valve hose clamp (1)
forward and gently remove the hose from
the fuel valve fitting on the gas t ank.
4. Remove the vent hose (2) from the
instrument panel, taking note of the hose
routing for reinstallation.
5. Remove the tank mounting bolt (3) at the
rear of the gas tank.
6. Move the t ank rearward and upward over
the engine. Slowly remove the tank and
be careful not to catch any hoses, wires
or other components. Pl ace the tank on a stable
surface or work bench. Be sure to protect the valve
from contamination or damage.
1
2
3
To Next Page
Loading...
Need help?
General
