125
MAINTENANCE AND LUBRICATION
Spark Plugs
Spark Plug Removal and Replacement
7. Using the forked end of the spark plug wrench
handle, remove the spark plug boot.
IMPORTANT: Do not pull on the wire to
remove the boot. Doing so may cause a wire
disconnection inside the boot.
8. Using t he spark plug wrench and handle, rotate
counterclockwise to remove the spark plug.
9. Reverse all steps to i nstall the spark plug and
reassemble the body. Torque the spark plug to 14
ft. lbs. (19 Nm). B e sure to reroute the vent hose
(1) through the instrument panel. Torque the tank
mounting bolt to 9 ft. lbs. (12 Nm).
1
To Next Page
Loading...
Need help?
General
