PULSE BAR
The Pulse Bar
q
is located under
the hood and can be used to
connect any Pulse Bar accessory to
the vehicle. The Pulse Bar receives
constant and switched power from
the battery, so that accessories may
be powered whether the vehicle is
on or off.
FOOT PEDALS
BRAKE PEDAL
Depress the brake pedal
q
to slow or stop the vehicle. Apply the brakes while
starting the engine.
When the brake pedal is depressed, the brake light comes on. Check the brake
light before each ride.
1. Turn the ignition switch to the ON position.
2. Apply the brakes. The brake light should come on after about 0.4 in (10 mm)
of pedal travel.
37
FEATURES AND CONTROLS
To Next Page
Loading...
Need help?
General
