13
ADJUSTMENTS
Adjustment Method
To adjust the vehicle’s steering system, first
loosen coupling rod nuts (1), then screw or
unscrew the coupling rod (2) an equal number of
revolutions on both sides of the vehicle. Re-
tighten nuts when adjustment is complete. See
Figure 14.
NOTE: Starting with an open alignment setting
provides a higher degree of precision of the
adjustment.
CAUTION: Before loosening coupling rod nuts (1)
on the vehicle's steering system, remember that
some nuts have reverse threads. Make sure to
unlock the nut in the proper rotational direction.
ATV
Figure 14
NOTE: Once parallelism of front Systems is set, verify
once more to confirm adjustment setting.
To Next Page
Loading...
Need help?
General
