To Next Page

To Previous Page

 The "Home" screen: click on "Add Appliance".

 Select the vacuum cleaner (PVCR-1028) in the "All Appliances" list

 Click on "Continue"

 The application prompts you to establish connection with WiFi-network “PVCR-1028”, click on

"Connect"

 Then follow prompts in the next screen to pair the appliance:

1. Press and hold the button until you hear a beep. The Wi-Fi indicator will flash quickly.

2. Then click on "Continue" in the application

 This causes displaying available WiFi networks. Select a sought network and type in password of WiFI

network you want to set the appliance for, then click on "Next"

 Wait until the configuration procedure completion.

 Click on "Continue"

Pairing a previously configured appliance:

 The "Home" screen: click on "Add Appliance".

 Look through the "Next to You" list to select the vacuum cleaner (PVCR-1028) (If the appliance in

absent, make sure your mobile device is connected to the WiFi network the applicance is configured

for).

 Then follow prompts in the next screen to pair the appliance:

1. Press and hold the button until you hear a beep. The Wi-Fi indicator will flash quickly.

2. Then click on "Continue" in the application

The appliance reconfiguration for another Wi-Fi network (diagnostics mode):

 Make sure your vacuum cleaner is not standing on the base. Do the following with a delay of no more than

3 seconds:

 Press and hold the button until you hear a beep. Release the button and wait for the Wi-Fi indicator

to flash quickly.

 Press and hold it again until you hear a beep. Release the button and wait for the Wi-Fi indicator to

flash slowly.

 Click on "New Appliance" on the "Home" screen.

 Select the vacuum cleaner (PVCR-1028) in the "All Appliances" list.

 Click on "Continue"

 The application prompts you to establish connection with WiFi-network “PVCR-1028”, click on

"Connect"

 Then follow prompts in the next screen to pair the appliance:

1. Press and hold the button until you hear a beep. The Wi-Fi indicator will flash quickly.

2. Then click on "Continue" in the application

 This causes displaying available WiFi networks. Select a sought network and type in password of WiFI

network you want to set the appliance for, then click on "Next"

 Wait until the configuration procedure completion.

 Click on "Continue"

Polaris PVCR 1028 WI-FI IQ Home User Manual

Questions and Answers: