29
OPERATION
Pre-Ride Inspection
Failure to inspect and verify that the vehicle is in safe operating condition before operating
increases the risk of an accident. Always inspect the vehicle before each use to make sure it's
in safe operating condition.
Item Remarks Page
Brake system/pedal travel Ensure proper operation 23
71
Brake fluid Ensure proper level 71
Park gear Ensure vehicle does not roll when in PARK. Ensure
PARK light illuminates.
-
Front suspension Inspect, lubricate if necessary 55
Rear suspension Inspect, lubricate if necessary 55
Steering Ensure free operation 72
Tires Inspect condition and pressure 12
73
Wheels/fasteners Inspect, ensure fastener tightness 73
Frame nuts, bolts, fasteners Inspect, ensure tightness -
Fuel and oil Ensure proper levels 25
56
Coolant level Ensure proper level 63
Coolant hoses Inspect for leaks -
Throttle Ensure proper operation 70
Indicator lights/switches Ensure operation 22
24
Air filter, pre-filter Inspect, clean 67
Air box sediment tube Drain deposits whenever visible 67
Headlamp Check operation, apply POLARIS dielectric grease
when lamp is replaced
75
Brake light/tail lamp Check operation, apply POLARIS dielectric grease
when lamp is replaced
76
Seat Belts Check length of belt for damage, check latches for
proper operation
26
Cab nets (or doors) Check for wear or damage, ensure proper installation 27
To Next Page
Loading...
