104
MAINTENANCE
Suspension Settings
Front/Rear Shock Compression
The compression damping clicker knob
is located on top of the shock reservoir.
When the knob is turned clockwise until
it stops, the damping is in the fully
closed position.
1. Turn the clicker clockwise to
increase compression damping.
2. Turn the clicker counter-clockwise
to decrease compression damping.
FOX Shocks
Setting Compression Damping
Softest 20 clicks from closed
Factory 10 clicks from closed
Firmest 2 clicks from closed
Walker Evans Shocks
Setting Compression Damping
Softest 16 clicks from closed
Factory 7 clicks from closed
Firmest 1 click from closed
To Next Page
Loading...
