BRAKING
The system continuously monitors the
brake switch status and vehicle
deceleration rate, reducing body
motion in braking conditions.
ACCELERATION
The system continuously monitors
vehicle speed, accelerator pedal
position, and engine speed to increase
damping of the rear shocks under
certain acceleration conditions to
reduce squat.
AIRBORNE DETECTION
The system continuously monitors the
state of the vehicle using its 6-axis
inertial measurement unit. When low-g
situations are encountered, the system
provides maximum damping until the
low-g situation is no longer present,
after which it reverts back to the user-
selected drive mode.
37
DYNAMIX™ ACTIVE SUSPENSION
To Next Page
Loading...
Need help?
General