Polaris RideCommand User Manual (English)

To Next Page

To Previous Page

MAINTENANCE

CARE AND MAINTENANCE

Use a soft cloth to clean the housing. Mild soap and water may be used. Do not

use harsh or abrasive cleaners.

The touch screen can be disabled in order to clean the display. For best results,

use a micro-fiber towel to clean the screen. Window cleaner or alcohol may be

used.

NOTE

Immediately clean off any gasoline that splashes on the display.

STORAGE

When preparing the vehicle for storage make sure the ignition switch is in the

OFF position to prevent battery drain and a shortened battery life.

SPEED LIMITATION

Various aspects of the display such as the front facing camera, GoPro preview,

phone contacts and call logs may be unavailable while driving at various

speeds.

UPDATE SOFTWARE

NOTE

Before updating the Display, always export your existing rides and waypoints

to a USB drive to avoid losing them.

To update the software, do the following:

ON YOUR PERSONAL COMPUTER

1. Upload the most recent software from ridecommand.polaris.com to a USB

flash drive.

ON YOUR VEHICLE

1. Press the Apps Screen button.

2. Tap on settings app and select General settings.

3. Select the Update Software arrow.

4. Select the down arrow icon to the left of the update you would like install.

5. Press Yes to install.

6. The display will initiate the update and restart with the new software. Do not

remove the USB flash drive until the display has fully restarted.

MAINTENANCE

Other manuals for Polaris RideCommand

Need help?

Do you have a question about the Polaris RideCommand and is the answer not in the manual?

General