DYNAMIX™ SYSTEM COMPONENTS
SHOCKS
2.5" FOX® Podium with Electronically Controlled Damping.
SUSPENSION CONTROL MODULE (SCM)
The Suspension Control Module (SCM) contains the logic for suspension con-
trol, including communications, operator inputs, and shock drivers, to execute
the suspension control algorithms. The SCM also has an internal 6-axis inertial
measurement unit which is used to monitor the performance of the vehicle by
the suspension control algorithms.
CAUTION
Moving or altering the SCM may have an adverse effect on vehicle handling.
Never move the SCM from it’s factory mounting location.
ELECTRONIC POWER ASSISTED STEERING (EPAS)
The Electronic Power Assisted Steering (EPAS) system has been enhanced with
a steering angle sensor to provide steering angle information to the SCM.
DYNAMIX™ SYSTEM FEATURES
VEHICLE SPEED SENSITIVITY
The system continuously monitors the speed of the vehicle and adjusts a base
level of damping for a given vehicle speed depending on the mode selected by
the user.
CORNERING CONTROL
The system continuously monitors
steering angle, lateral acceleration,
and vehicle yaw rate to provide
enhanced cornering control, reducing
body motion for maximum
performance.
36
DYNAMIX™ ACTIVE SUSPENSION
To Next Page
Loading...
Need help?
General