DEMONSTRATION MODE
When the vehicle is first keyed on, and the shift lever is in the Park (P) position,
the SCM will enter a demonstration mode. The suspension will react to the
operator inputs as if the vehicle was being driven. After a period of time (5
minutes), the SCM will exit demonstration mode and stop driving the shocks to
conserve vehicle power. The vehicle will enter normal operation if the engine is
started.
NOTE
The vehicle will enter demonstration mode any time the shift lever is in the park
position (P), the engine speed is at 0 rpm, and the vehicle speed is at 0 mph.
Demonstration mode will time out after 5 minutes.
41
DYNAMIX™ ACTIVE SUSPENSION
To Next Page
Loading...
Need help?
General