To Next Page

To Previous Page

9926813 R04 - 2013-2016 RZR 570 Service Manual

2.31

SUSPENSION

SPRING PRELOAD ADJUSTMENT

The front and rear shock absorber springs are adjustable

by rotating the adjustment cam to change spring tension

preload.

WARNING

Uneven adjustment may cause poor handling of the

vehicle, which could result in an accident and serious

injury or death. Always adjust both the left and right

spring preloads equally.

Suspension Spring Adjustment

1. Position the vehicle on a level surface and stop the

engine.

2. Raise and safely support the front or rear of the

vehicle off the ground to allow the suspension to fully

extend.

NOTE

The tires should not be touching the ground.

3. To adjust the suspension, rotate the adjustment cam

clockwise to increase spring tension or counter-

clockwise to decrease spring tension.

Shock Spanner Wrench

2871095

4. Each notch of the adjustment will add 6% - 8% more

preload to the spring over the primary position.

MAINTENANCE

Polaris RZR 570 2016 User Manual

Questions and Answers: