14. Remove the dipstick
e
and
wipe it dry with a clean rag.
15. Reinstall the dipstick to fully
seat it. Make certain the
dipstick is inserted all the
way down to ensure an
accurate reading.
16. Remove the dipstick and check the oil level.
17. Add the recommended oil as necessary to bring the oil level within the SAFE
range (between the holes) on the dipstick. Do NOT overfill.
IMPORTANT
A rising oil level between checks during cold weather operation can indicate
contaminants such as gas or moisture collecting in the crankcase. If the oil
level is over the upper mark, change the oil immediately.
18. When finished, reinstall dipstick.
19. Reinstall the cargo box.
20. Dispose of used oil, filter, and rags properly.
95
MAINTENANCE
To Next Page
Loading...
Need help?
General
