5.14
9926814 R08 - 2015-2016 RZR 900 2016 RZR S 1000 Service
Manual
© Copyright Polaris Industries Inc.
PVT BREAK-IN (DRIVE BELT / CLUTCHES)
A proper break-in of the clutches and drive belt will
ensure a longer life and better performance. Break in the
clutches and drive belt by operating at slower speeds
during the 10 hour break-in period as recommended (see
Chapter 3 Engine Break-In Period, page for break-in
example). Avoid aggressive acceleration and high speed
operation during the break-in period. After installation of
a new drive belt, break-in new drive belts by operating at
slower speeds during the break-in period ~50 miles.
Carry only light loads. Avoid aggressive acceleration,
high speed operation, and extended time at a specific
RPM during the break-in period. In addition, when
operating in sand/dune environments, avoid extended
low speed operation at high throttle.
PVT SYSTEM
To Next Page
Loading...
