ITEM INSPECTION PROCEDURE
SEE
PAGE
Mirrors Adjust for proper side and rear view.
-
Seat Belts Check length of belt for damage, check latches for proper
operation.
page
57
FUEL LEVEL
1. Position the vehicle on a level surface.
2. Press the engine start/stop button twice.
3. Observe the fuel level in the fuel gauge
q
. See the Instrument Cluster
section for details.
4. Refuel as needed. See page 73 for fuel specifications.
STEERING
1. Position the vehicle on a level surface.
2. Turn the steering wheel full left, then full right. The action should be smooth,
but not loose.
FRONT SUSPENSION
Inspect the front suspension for oil leaks or damage. Verify smooth suspension
operation.
67
PRE-RIDE INSPECTIONS
To Next Page
Loading...
Need help?
General
