91
MAINTENANCE AND LUBRICATION
Tire Tread Depth
Always replace tires when tread
depth is worn t o 1/8″ (.3 cm) or less.
See illustration.
Wheel Removal
1. Stop the engine, place the transmission in
PARK and lock the parking brake.
2. Loosen the wheel nuts slightly.
3. Elevat e the side of the vehicle by placing a suitable stand under the
footrest frame.
4. Remove the wheel nuts and remove the wheel.
Operating your ATV with worn tires, improperly inflated tires,
non-standard tires or improperly installed tires will affect vehicle
handling and could cause an accident resulting in serious injury
or death.
Maintain proper tire pressure as described on the decal on your
ATV and in the owner’s manual.
Always use original equipment size and type when replacing
tires.
Make sure the wheels are installed properly.
Always replace tires when the tread depth measures 1/8″ (.3 cm)
or less.
WARNING
1/8I (.3 cm)
To Next Page
Loading...
