28
FEATURES AND CONTROLS
All Wheel Drive (AWD) System
The AWD switch may be turned
on or off while the vehicle is
moving. AWD will not engage
until engine speed is below 3100
RPM. AWD remains engaged
until the switch is turned off.
There is no limit to the length of
time the vehicle may remain in
AWD.
If the switch is turned off while the demand drive unit is engaged, it will
not disengage until the rear wheels regain traction. Engage AWD before
getting into situations where maximum traction is needed. If the rear
wheels are spinning, release the throttle before switching to AWD.
NOTE: The override switch allows activation of AWD in reverse if the AWD
switch is on. See page 20.
Switching to AWD (or from TURF to 2X4) while the rear wheels are spinning
may cause severe drive shaft and gearcase damage. Always switch to AWD (or
to TURF from 2X4) while the rear wheels have traction or are at rest.
AWD
Switch
To Next Page
Loading...
