Additional 600-line Camera Troubleshooting help from Product Alerts and RIBs
NOTE: Many of the problems and fixes described below were temporary solutions, later
permanently corrected by design/manufacturing changes. Thus the repair material
described below may or may not be present in or applicable to a later version of the
camera.
Subject Bulletin # Date
Troubleshooting Update — 600 line cameras 600AM #46 3/36/84
Exposure Flex Photocell movement
Trapped Shuttle in CU lens 600AM #92-35 10/27/92
Continuous cycle from angled film pack
Strobe LEDs: red only; red & green; green only 600AM #83 10/31/87
Hybrid 2-LED Strobe PC Boards 600AM #92-22 3/26/92
Low-cost, one green LED Strobe 600AM #91-17 12/16/91
No strobe charge from dirty S10 contacts 600AM #48 5/2/84
Black/dark pictures from light leaks to photodiode 600AM #93-40 1/18/93
Black pictures from light leak behind strobe 600AM #95-45 7/9/95
Streaked pictures from apron light leaks 600AM #78 8/13/87
Continuous cycling from Contact Support Block 600AM #91-16 12/16/91
Release Button-Door Latch clearance problem 600AM #91-6 5/28/91
Oxidation on flex circuit solder pads 600AM #96 12/11/89
84
To Next Page
Loading...
Need help?
General
