When shooting under these conditions Select this
mode
Icon shown
on the LCD
screen
The ash res automatically as needed. Use this
setting to take most pictures.
Auto Flash
Use this setting to avoid red glare in your subject’s
eyes. The camera res a brief preash before the
regular ash.
Red-eye Reduction
The ash does not re. Use this setting for
outdoor pictures, or where ash is prohibited or
may be distracting, or when shooting towards a
reective surface, such as a window or a mirror. If
there is not enough light when using this setting,
your pictures will be too dark.
Flash Off
The ash res for every picture. Use this setting
in high-contrast situations to provide ll-light or
use it indoors in low light.
Flash Always On
NOTE:
Never touch or block the ash with your ngers. Doing so can damage these
components and interfere with the correct ash operation.
To Next Page
Loading...
