- 29 -
System Setup
DVD Setup
You can customize the set up menu to your own preference.
Press the DVD SETUP button on the remote control to display the setup menu. The
menu will include “General Setup”, “Speaker Setup”, “Dolby Digital Setup”, “Video
Setup”, and “Preference Setup”. Press the direction button () on the remote
control to select a category. All the items in the category will appear on the screen.
Press the ENT button to enter the category.
Category
When you enter a category all the items under this category will appear, the
highlighted category is the current set up.
Press the right direction button () on the remote control to select another category
(new selection will be highlighted). Press the ENT button for confirmation.
Press the left direction button () to enter the other setup menu(s).
General Setup
TV Display
Select Normal/PS or Normal/LB when a 4:3 TV is connected.
Select Wide when using a 16:9 screen on the unit or when a wide screen TV is
connected to the video output.
OSD Lang
There are three different OSD languages for selection. You can select English,
French or Spanish.
Screen Saver
When activated, under stop mode, the unit will go into screen saver mode if the same
image remains on the screen for several minutes.
Speaker Setup
Down mix
Select “LT/RT”, the player will output the audio signal in Mix-Mono.
Select “Stereo”, then the player will output a stereo signal.
Dolby Digital Setup
Dual Mono
The function is used to select from Stereo, Left only, Right only, and Mix-mono.
To Next Page
Loading...
Need help?
General
