- 24 -
Other Function
External AV Input Function
The unit has external AV input function. It supports S-VIDEO, Composite and Component modes.
Use the audio, video and S-Video cable to connect the unit to the external AV signal source such as
recorder, vidicon, satellite receiver or game player etc. Then turn on the unit and the external AV
signal source. Press the INPUT button to shift to the corresponding mode: S-VIDEO, Composite or
Component. Then you can go on to set up the menu in a certain mode.
Computer Screen Function
The TFT LCD screen of the unit can be used as the computer screen. Take the steps of connecting
the unit to the PC and then you can set up the menu.
You had better set the PC’s resolution at: 1024 x 768@60Hz.
The operations of these menus in S-VIDEO, Composite, Component and VGA modes are the
same with those in the TV mode. Please refer to the introduction in “TV Function”.
Note: Some of these menus are not available in these modes.
To Next Page
Loading...
