• Reset Feature
In the rare situation that the camera locks up (usually in a very low
power situation), we have incorporated a Reset button on the back of
the camera that allows the camera processor to be reset without losing
any images.
To use the Reset button, simply depress the Reset button gently
(holding for around 5 seconds) using a paper clip or ball point pen. The
camera will power off automatically. It is important to note that the
camera probably needs to be recharged immediately in order to avoid
locking up again.
M
S
E
T
/
Reset Button
• Checking the Battery Power Level
Check the battery power level before taking pictures.
1.
Turn the camera on.
2. Check the battery power level that appears on the LCD screen.
Battery power is full.
Battery power is adequate.
Battery power is low.
Battery power is exhausted.
To Next Page
Loading...
Need help?
General
